SEGUE
SEGUE Target Selection
Example color-color diagram of SEGUE target selection categories.
A paper describing the SEGUE Target Selection has been submitted to
the Journal, a link to it will appear here soon.
The first table below lists the possible targettype (in the sppParams
CAS table) and the PrimTarget (in the specobjall table) bit settings
available on each spectrum if this object was a SEGUE target.
In addition, the same v4.6 Target selection bits were set for
all stellar objects (g < 21 or z < 21) in the main DR7 photoobjall table in the
SEGUEPrimTarget field, whether or not they actually received a
SEGUE fiber. These bits may be used to analyze completeness and efficiency
of SEGUE target selection.
Summary Table of SEGUE Target Selection Categories
Category vers PrimTarg Bit Color (dereddened) ,Mag cuts PerPlate Total Success
-------------------------------------------------------------------------------------------------------------------------
WD/sdO/sdB v4.6 0x80080000 g < 20.3, -1 < g-r < -0.2, -1 < u-g < 0.7, u-g + 2(g-r) < -0.1 25 4069 0.62
CWD v4.6 0x80020000 r < 20.5, -2 < g-i < 1.7, H_g > 16.05+2.9(g-i) 10 1187 0.005
BHB/BS/A v4.6 0x80002000 g < 20.5, 0.8 < u-g < 1.5, -0.5 < g-r < 0.2 150 24688 0.66
F v4.6 0x80100000 g < 20.3, -0.7 < P1(s) < -0.25, 0.4 < u-g < 1.4, 0.2 < g-r < 0.7 200 37900 0.68
Low Metal v4.6 0x80010000 r < 19, -0.5 < g-r < 0.75, 0.6 < u-g < 3.0, l > 0.135 150 29788 0.12
F/G v4.6 0x80000200 g < 20.2, 0.2 < g-r < 0.48 50 6939 0.9
G v4.6 0x80040000 r < 20.2, 0.48 < g-r < 0.55 375 62784 0.96
v3.3 r < 20.2, 0.50 < g-r < 0.55
K giants v4.6 0x80004000 r < 18.5, 0.5 < g-r < 0.8 70 16866 0.3
l > 0.07 pm < 11 mas/yr
M giants v4.6 0x80004000 r < 18.5, 0.8 < g-r < 1.2, pm < 5 mas/yr 30 5948 0.08
AGB v4.6 0x80800000 r<19.0, 2.5 < u-g < 3.5, 0.9 < g-r <1.3, s < -0.06 10 1343 0.08
dK , dM v4.6 0x80008000 r < 19, 0.55 < g-r < 0.75 50 18358 0.80
sdM v4.6 0x80400000 r < 20 , g-r > 1.6, 0.9 < r-i < 1.3 25 1012 0.003
esdM v4.6 0x81000000 (g-r)0.787-0.356>(r-i) , r-i <0.9, H_r >17, 2.4 >g-i>1.8 40 9420 0.20
WDMS v4.6 0x80001000 g < 20, (u-g) < 2.25, -0.2 < g-r < 1.2, 0.5 < r-i < 2.0 5 487 0.65
g-r > -19.78(r-i)+11.13, g-r < 0.95(r-i)+0.5
i-z > 0.5 for r-i > 1
i-z > 0.68(r-i)-0.18 for r-i <= 1
L v4.6 0x80200000 z < 19.5, i-z > 1.7 5 1277 0.07
u > 21
LL Blue v4.6 0x80000800 g-r < 0.25 800 8522 0.3
LL AGB v4.6 0x88000000 s > -0.13, 3.5 > u-g > 2.6, 0.8 < g-r <1.3 50 499 0.3
LL KIII v4.6 0x80000400 0.55 < g-r < 0.9, g < 19, pm < 11 mas/yr 300 3220 0.3
-----------------------------------------------------------------------------------------------------------------------
The paper which describes the SEGUE Target Selection also has
a brief section describing the Legacy Stellar target selection.
The table below lists the possible targettype (in the sppParams
CAS table) and the PrimTarget (in the specobjall and photoobjall tables)
bit settings available on each spectrum if this object was a Legacy target.
Legacy Survey Stellar Target Selection categories
-----------------------------------------------------------------------------------------------------------------------
Category PrimTarget bit color, mag cuts Total Fibers
-----------------------------------------------------------------------------------------------------------------------
SPECTROPHOTO_STD s0x20 0.1 < g-r < 0.4, 16 < g < 17.1 20320
REDDEN_STD s0x2 0.1 < g-r < 0.4, 17.1 < g < 18.5 22337
HOT_STD 0x200 g < 19, u-g < 0, g-r < 0 3370
ROSAT_C 0x800 r < 16.5 ROSAT X-ray source within $60'' 8000
ROSAT_C 0x800 u-g <1.1 ROSAT within $60''
ROSAT_E 0x8000000 ROSAT within $60''$ 8000
STAR_BHB 0x2000 -0.4 < g-r < 0, 0.8 < u-g < 1.8 19887
STAR_CARBON 0x4000 g-r > 0.85, r-i > 0.05, i-z > 0, r-i < -0.4+0.65(g-r) 4453
(g-r) > 1.75
STAR_BROWN_DWARF 0x8000 z<19, err(i) < 0.3, r-i > 1.8, i-z > 1.8 667
STAR_SUB_DWARF 0x10000 g-r > 1.6, 0.95 < r-i < 1.6, err(g) < 0.1 1482
STAR_CATY_VAR 0x20000 g<19.5, u-g < 0.45, g-r < 0.7, r-i > 0.3, i-z > 0.4 8959
0x20000 (u-g)-1.314(g-r) < 0.61 , r-i > 0.91, i-z > 0.49
STAR_RED_DWARF 0x40000 i < 19.5, err(i) < 0.2, r-i > 1.0, r-i > 1.8 14649
STAR_WHITE_DWARF 0x80000 g-r < -0.15, u-g+2(g-r) < 0,r-i < 0 6059
H_g > 19 , H_g > 16.136 + 2.727(g-i)
g-i > 0, H_g > 16.136 + 2.727(g-i)
STAR PN 0x10000000 g-r > 0.4, r-i < -0.6, i-z > -0.2, 16 < r_0 < 20.5 20
SERENDIP_BLUE 0x100000 u-g <0.8, g-r < -0.05 81937
SERENDIP_FIRST 0x200000 FIRST radio source within 1.5'' 14689
SERENDIP_RED 0x400000 r-i > 2.7, i-z >1.6 4179
SERENDIP_DISTANT 0x800000 g-r>2, r-i <0 11820
-----------------------------------------------------------------------------------------------------------------------
Current version of the target selection algorithm is
v4.6.
-
The plate list table
denotes which version of the target selection was used for each plate.
Notes at the beginning of each version of the target selection
highlight changes from previous version. In addition, there are
occasional special target selection cuts utilized for specific plates/targets.
Target Categories
White Dwarf
Cool White Dwarf
A/BHB
F turnoff, subdwarf
F/G stars
G stars
K giant
Low Metallicity
K dwarf
Main sequence - White dwarf pair
M sub-dwarf
L, T Brown dwarf
AGB candidate
Overview
SEGUE has as one of its goals a kinematic and stellar population study
of the high-latitude thick disk and halo of the Milky Way. The halo
is sampled sparsely with a series of seven deg2 tiles both in the
SEGUE imaging stripes and the main Legacy survey area, with centers
separated by roughly 10 deg. Each such tile is sampled with two
pointings, split at r=17.8, approximately the median target
magnitude.
Half of the ~1180 targets on each line of sight are
selected using straightforward color-color and color-magnitude cuts designed
to
sample across the main sequence from g-r = 0.75 (K-dwarfs at T
eff ~ 5000K) through the main sequence turnoff. To this sample we
add metal-poor main sequence turnoff stars selected by their blue
ugr colors, essentially an ultraviolet excess cut that is extremely
efficient at separating the halo from the thick disk near the turnoff.
At r = 19.5, the average star that makes this selection is at a
heliocentric distance of 10 kpc for [Fe/H] = -1.54. To reach to
greater distances, we use the strength of the Balmer jump to select
field blue horizontal branch (BHB) stars in the ugr color-color
diagram.
The halo BHB sample extends to distances of 40
kpc, and we select all available BHB candidates in our high-latitude
fields.
The most distant spectroscopic target category in SEGUE is halo red
giants. We select halo giant candidates by the photometric offset in
the ugr color-color diagram caused by their ultraviolet excess and
weak MgH relative to foreground disk dwarfs, augmented by a 3σ
proper motion cut using a
recalibrated version of the USNO-B catalog.
Spectroscopic identification of true giants using the methodology in
has shown that the giant selection is roughly
50% efficient at g < 17, the current limit to which we can reliably
identify giants in the spectra. The halo giant sample identified in
this way reaches distances of 40 kpc from the sun.
The spectroscopic selection also includes smaller categories of rare
but interesting objects. These include cool white dwarfs selected
with the recalibrated USNO-B reduced proper motion diagram, which can
be used to date the age of the Galactic disk, and high proper motion
targets from the SUPERBLINK
catalog, which have uncovered some of the
most extreme M subdwarfs known and aided in
the calibration of their metallicity scale using common proper motion
pairs.
Notes:
- All ugriz magnitudes listed below are dereddened PSF mags
objc_flag[2] check:
No bright, no edge, no bad interp, no bad deblends
- For selections which involve u band, we require that
the u flags indicate a u band detection.
- The 'regular SDSS bright end cut' is:
No spectra of
objects with g,r or i fiber mag < 14.5 allowed.
- For SEGUE v2_0 we cut on r only at rfiber < 14.5.
This resulted in fiber warnings for
red stars where
r-i > 0 → i < 14.5.
The spectra were ok however and scattered light was not
harmful to adjacent fibers on the CCDs.
- For SEGUE v3_0 we cut on ifiber < 14.2.
This allows bright blue things to get spectra and still avoids
putting very red bright stars on the plate to scatter.
- Also, proper motions have been included for objects
which have matches to the USNO-B catalog and are used
in the K giant and Cool White dwarf selection categories.
- Low Latitude Algorithms implemented:
- AGB type objects at low latitude
- K III type objects at low latitude
- Bluetip objects at low latitude
- AMNH high proper motion objects at low latitude
- Principle component color definitions:
l = -0.436u + 1.129g - 0.119r - 0.574i + 0.1984
and is a photometry metalicity indicator for stars
in the color range 0.5 < g-r < 0.8.
Reference: Lenz, D., Newberg, H., Rosner, R., Richards, G.
& Stoughton, C. 1998 ApJS 119, 121
s = -0.249u + 0.794g - 0.555r + 0.234
P1(s) = P1 = 0.91(u-g) + 0.415(g-r) -1.280
Reference: Helmi et al 2003
(bit -2146959360 → 0x80080000)
- Color cuts:
- g < 20.3
- -1 < g-r < -0.2
- -1 < u-g < 0.7
- u-g + 2(g-r) < -0.1
Weighting: magslope 1.2
Target count Goal: 25 per plate pair
(bit -2147352576 → 0x80020000)
- Color cuts:
- 14.5 < r < 20.5
- -2 < g-i
- g-i < 1.7 (if no neighbor with g > 22 within 7 arcsec)
- otherwise g-i < 0.12
- Require reliable proper motion (μ) measurement:
- one-to-one match to USNO_B
- good proper motion fit (small rms in each coordinate)
- be detected in all 5 epochs in USNO-B
- no neighbor brighter than g = 22 within 7 arcsec
(to avoid blending problems)
OR
blue enough (g-i < 0.12) that target is likely white dwarf
- Cuts on reduced proper motion Hg = g + 5*log(μ) + 5
- Hg > 17.5
- Hg > 16.05 + 2.9*(g-i)
Weighting: magslope 1.2
Target count Goal: 10 per plate pair (but allow overflow if they are present)
(bit -2147475456 → 0x80002000)
- Color cuts:
- g < 20.5
- 0.8 < u-g < 1.5
- -0.5 < g-r < 0.2
- u detection present
- Also compute color-gravity index:
- v = 0.283(u-g) - 0.354(g-r) + 0.455 (r-i) + 0.766 (i-z)
Weighting: weight on the 'v' parameter so object with v color
of 0 is 4 times as likely to get fiber as v of 0.4.
Target count Goal: 150 per plate pair (get ~100 per pair)
(bit -2146435072 → 0x80100000)
- Color cuts:
- -0.7 < P1(s) < -0.25
- 0.4 < u-g < 1.4
- 0.2 < g-r < 0.7
- g < 20.3
- P1 is a color perpendicular to the locus for F/G/K stars;
more negative P1 indicates lower-metallicity side of locus.
- Note: there was an s-color cut in versions prior to v3.3, s &ge -0.065,
no longer present for v3.3 and beyond.
Weighting: colorslope+ magnitude weighting P1 min/max slope = 5
Target count Goal: 200 per plate pair
(bit -2147483136 → 0x80000200)
- Color cuts:
- 0.2 < g-r < 0.48
- 14.0 < g < 20.2
Unbiased random subsampling of this range of g-r color space
Target count Goal: 50 per plate pair
(bit -2147221504 → 0x80040000)
- Color cuts:
- 14.0 < r < 20.2
- 0.48 < g-r < 0.55
Note: slightly wider g-r color band to get sufficient targets at high |b|.
Weighting: random
Target count Goal: 375 per plate pair
(bit -2147467264 → 0x80004000)
- Color cuts:
- r < 20.2
- 0.7 < u-g < 4.0
- 0.35 < g-r < 0.8
- 0.15 < r-i < 0.6
- l-color > 0.07
Also: Proper motion < 11 milliarcsec/year and good proper motion match
Weighting: magslope 2.0
Target count Goal: 95 per plate pair
(expected density 4/sq deg = 28/plate pair)
(bit -2147418112 → 0x80010000)
- Color cuts:
- 14 < r < 19.5
- -0.5 < g-r < 0.75
- 0.6 < u-g < 3.0
- l-color > 0.135
- require detection in u band
Weighting: magslope 1.8 and faint plate targets sorted by
magnitude to 'pack' them, so that brightest ones targeted before
fainter ones.
Target count Goal: 150 per plate pair
(bit -2147450880 → 0x80008000)
- Color cuts:
- 14.5 < r < 19.0
- 0.55 < g-r < 0.75
Selection: Random subsample
Target count Goal: 95 per plate pair
(bit -2147479552 → 0x80001000)
Note that for this category only: colors are NOT dereddened.
- Color cuts (from Potsdam group):
- u-g < 2.25
- g-r > -0.2
- g-r < 1.2
- r-i > 0.5
- r-i < 2.0
- g-r > -19.78*(r-i) + 11.13
- g-r < 0.95*(r-i) + 0.5
- i-z > 0.5 for r-i > 1.0
- i-z > 0.68*(r-i)-0.18 for r-i &le 1.0
- 15 < g < 20
Target goal: 5 per plate pair, maximum of 10
(bit -2143289344 → 0x80400000)
- Color cuts (based on West et al):
- g-r > 1.6
- 0.95 < r-i < 1.3
- 14.5 < r < 19.0
Selection: magslope 0.9
Target count Goal: < ~5 per plate pair
Plus:
Lepine Shara AMNH high proper motion stars
Goal 25-30 per plate pair
Proper motion selected.
(bit -2145386496 → 0x80200000)
- Color cuts:
- z < 19.5
- u > 21
- g > 22
- r > 21
- i-z > 1.7
Note: for brown dwarf selection we require additional flag
checks on i and z band as suggested by X.Fan.
Target count Goal: < 5 per plate pair
(bit -2139095040 → 0x80800000)
- Color cuts:
- 14.0 < r < 19.0
- 2.5 < u-g < 3.5
- 0.9 < g-r < 1.3
- s-color < -0.06
- detection in u band
Selection: magslope 1.4
Target count Goal: 10 per plate pair
Plates 2336, 2337:
Special K giant selection
Approximately 200 fibers allocated to objects with
0.35 < g-r < 0.9
proper motion consistent with zero.
No selection boundary parallel to the stellar locus imposed.
Another 200 fibers allocated to random subsample of stellar
locus with
0.2 < g-r < 0.48
These two plates are at (l,b) = (130, -23), (150,+26) respectively,
and likely contain Monoceros Giants.
Summary of changes from v3.4:
Low Latitude Algorithms implemented:
- AGB type objects at low lat
- K III type objects at low lat
- Bluetip objects at low lat
- AMNH high proper motion objects at low lat
Summary of changes from v3.3:
MSWD colors are now NOT dereddened psf mags (previously were
dereddened).
'l-cut' for Low metallicity backed off to 0.135 from 0.15,
which allows more in, as too many bright candidates were
not getting fibers.
Summary of changes from v3.2:
A/BHB
new color cuts (H. Newberg algorithm)
- g < 20.5, 0.8 < u-g < 1.5, -0.5 < g-r < 0.2, u detection present
Also: compute color-gravity index:
v = 0.283(u-g) - 0.354(g-r) + 0.455 (r-i) + 0.766 (i-z)
Weighting: weight on the 'v' parameter so object with
v color of 0 is 4 times as likely to get fiber as v of 0.4.
Target count Goal: 150 per plate pair (get ~100 per pair)
F turnoff
s-color cut is no longer present
*Addition of new F/G stars category:
bit -2147483136
0.2 < g-r < 0.48, 14.0 < g < 20.2, unbiased random subsampling
of this range of g-r color space,
Target count Goal: 50 per plate pair
Low Metallicity
New for v3_3: We move the 'l' weight to l-color > 0.15 (was > 0.12).
This is more restrictive, hoping to land higher fraction
of [Fe/H] < -2 objects.
*Addition of new Main Sequence-White Dwarf pair category:
(based on color cuts from Potsdam group)
Note that for this category only: colors are NOT dereddened.
bit -2147479552
- u-g < 2.25
- g-r > -0.2
- g-r < 1.2
- r-i > 0.5
- r-i < 2.0
- g-r > -19.78*(r-i) + 11.13
- g-r < 0.95*(r-i) + 0.5
- i-z > 0.5 for r-i > 1.0
- i-z > 0.68*(r-i)-0.18 for r-i <= 1.0
- 15 < g < 20
Target goal: 5 per plate pair, maximum of 10
Summary of changes from v3.1:
A/BHB selection
CHANGE For v3_2: Sort candidates by color,
so that all, or most, blue BHBs g-r < 0 , get a fiber.
Summary of changes from v3.0 (in bold):
Cool White Dwarf:
Target goal: 10 per plate pair, but allow overflow if they are present.
K Giant
Target Goal: 95 per plate pair (expected density 4/sq deg = 28/plate pair)
Low Metallicity
New for v 3.1: We also weight by l-color to
favor the ones closer to the blue edge of the u-g color in the stellar locus.
K dwarf
Target Goal: 95 per plate pair
M sub-dwarf
M sub-dwarfs (color based West et al )
g-r > 1.6, 0.95 < r-i < 1.3, 14.5 < r < 19.0
Target count Goal: <~5 per plate pair
Selection: magslope 0.9
Plus: Lepine Shara AMNH high proper motion stars , goal 25-30 per
plate pair, proper motion selected.
Summary of changes from v2.0:
- For selections which involve u band, we require that
the u flags indicate a u band detection.
- The 'regular SDSS bright end cut' is: No spectra of
objects with g, r or i fiber mag < 14.5 allowed.
- For SEGUE v2.0 we cut on r only at rfiber < 14.5,
this resulted in "whopping" fiber warnings for
red stars where r-i > 0 → i < 14.5.
The spectra were ok however and scattered light was not
harmful to adjacent fibers on the CCDs.
- For SEGUE v3_0 we are cutting on ifiber < 14.2.
This allows bright blue things to get spectra and still avoids
putting very red bright stars on the plate to scatter.
- Also, proper motions have been included for objects
which have matches to the USNO-B catalog and are used
in the K giant and Cool White dwarf selection categories.
- Significant changes to Cool White Dwarf, M dwarf
- Addition of Brown dwarf category
Specific category changes (in bold):
White Dwarf:
g < 20.3 , -1 < g-r < -0.2, -1 < u-g < 0.7
u-g + 2(g-r) < -0.1
Weighting: magslope 1.2
Target goal: 25 per plate pair
Cool White Dwarf:
- Color cuts:
- 14.5 < r < 20.5
- -2 < g-i
- g-i < 1.7 (if no neighbor with g > 22 within 7 arcsec)
- otherwise g-i < 0.12
- Require reliable proper motion (μ) measurement:
- one-to-one match to USNO_B
- good proper motion fit (small rms in each coordinate)
- be detected in all 5 epochs in USNO-B
- no neighbor brighter than g = 22 within 7 arcsec
(to avoid blending problems)
OR
blue enough (g-i < 0.12) that target is likely white dwarf
- Weighting: magslope 1.2
- Target goal: 10 per plate pair
A/BHB
g < 20.5, 0.6 < u-g < 1.4, -0.5 < g-r < 0.2,
scolor < -0.065
Weighting: magslope 2.0
Target goal: 150 per plate pair (get ~ 100 per pair)
F turnoff, subdwarf
-0.7 < p1(s) < -0.25, 0.4 < u-g < 1.4,
0.2 < g-r < 3.0, g < 20.3
Weighting: colorslope + magnitude wighting P1 min/max slope = 5
Target goal: 200 per plate pair
G star
14.0 < r < 20.2, 0.48 < g-r < 0.55
Note slightly wider g-r color band to get sufficient targets
at high |b|.
Weighting: random
Target goal: 375 per plate pair
K Giant
r < 20.2, 0.7 < u-g < 4.0 , 0.35 < g-r < 0.8,
0.15 < r-i < 0.6,
l-color > 0.07
proper_motion < 11 milliarcsec/year and good propermotion match
Weighting: magslope 2.0
Target Goal: 100 per plate pair
Low Metallicity
14 < r < 19.5, -0.5 < g-r < 0.75, 0.3 < u-g < 3.0, l-color > 0.12
also require detection in u band.
Weighting: magslope 1.8 and
Faint plate targets sorted by magnitude to 'pack' them, so
that brightest ones targeted before fainter ones.
Target Goal: 150 per plate pair
K dwarf
14.5 < r < 19.0, 0.55 < g-r < 0.75
Selection: Random subsample
Target count Goal: 100 per plate pair
*M sub-dwarf
bit -2143289344
M sub-dwarfs (color based West et al )
g-r > 1.51, 0.95 < r-i < 1.3, 14.5 < r < 19.0
Target count Goal: <~25 per plate pair
Selection: magslope 0.9
*L,T brown-dwarf selection
bit -2145386496
z < 19.5, u > 21, g > 22, r > 21, i-z > 1.7
for Brown dwarf selection we require additional flag
checks on i and z band as suggested by X. Fan.
Target count Goal: < 5 per plate pair
AGB candidate selection
14.0 < r < 19.0, 2.5 < u-g < 3.5, 0.9 < g-r < 1.3,
s-color < -0.06
detection in u band required.
Selection: magslope 1.4
Target count Goal: 10 per plate pair
All magnitudes are dereddened PSF mags
Flags: No bright, no edge, no bad interp, no bad deblend
White dwarf selection
bit -2146959360
g < 20.3 , -1 < g-r < -0.2, -1 < u-g < 0.5
Weighting: colorslope
Target count Goal: 25 per plate pair
Cool White dwarf selection
bit -2147352576
15 < r < 20, -0.1 < g-r < 1.1, g-r > 2.4(r-i) + 0.5, i-z < 0
Weighting: colorslope
Target count Goal: 10 per plate pair
A/BHB selection
bit -2147475456
g < 20.5, 0.5 < u-g < 1.4, -0.8 < g-r < 0.2,
scolor < -0.065
Weighting: colorslope
Target count Goal: 150 per plate pair
F turnoff, sub-dwarf selection
bit -2146435072
-0.7 < p1(s) < -0.3, 0.4 < u-g < 1.7, -0.3 < g-r < 3, g < 20.3
Weighting: colorslope+ magnitude weighting
Target count Goal: 150 per plate pair
G selection
bit -2147221504
14.2 < r < 20.2, 0.50 < g-r < 0.55
Weighting: random
Target count Goal: 375 per plate pair
K Giant Selection
bit -2147467264
r < 20.2, 0.7 < u-g < 4.0 , 0.40 < g-r < 1.2,
0.15 < r-i < 0.6, l-color > 0.1
proper_motion < 15 arcsec/century
(this should have been 1.5 arcsec/cent)
Weighting: colorslope
Target count Goal: 100 per plate pair
Low Metallicity selection
bit -2147418112
r < 20.2, -0.5 < g-r < 0.9, 0.3 < u-g < 3.0,
l-color > 0.15
Weighting: colorslope
Target count Goal: 150 per plate pair
K dwarf selection
bit -2147450880
14.5 < r < 19.5, g-r > 0.7, r-i < 0.8
Selection: Random
Target count Goal: 125 per plate pair
M dwarf selection
bit -2145386496
Three selections in one:
- regular M dwarfs
- high velocity M dwarfs (ppm based),
- M sub-dwarfs (color based)
regular M dwarfs: r-i > 0.3, 14.5 < r < 19.0 (N=12)
sub-dwarf cands: u-g > 1.8, g-r > 0.8, 0.5 < r-i , 14.5 < r < 19 (N=15)
high-velocity M dwarfs: r-i > 0.3, 14.5 < r < 19.3
velocity proxy >~ 100 km/s (25)
Selection: colorslope (Mdwarfs), high velocity weighted colorslope,
colorslope (SubDwarfs)
Target count Goal: 50 per plate pair (sum of three sub-categories)
AGB candidate selection
bit -2139095040
14.5 < r < 19.5, 2.5 < u-g < 3.5, 0.9 < g-r < 1.3,
s-color < -0.07
Selection: colorslope
Target count Goal: 15
|
|